When using floor scrubber pads for ground cleaning, mastering the correct usage techniques not only enhances the cleaning effectiveness but also effectively extends the service life of the pads. Here are some practical cleaning tips for floor scrubber pads:

1. Choose the appropriate pad: Select a pad with the right hardness and material based on the floor type (such as ceramic tiles, stone, wooden floors, epoxy flooring, etc.) and the degree of soiling (mild, moderate, severe). Hard pads are suitable for removing heavy stains, medium-hardness pads are ideal for daily cleaning, and soft pads are gentle on sensitive floor surfaces.

2. Pre-treat heavy stains: For localized stubborn stains, pre-treat them with a cleaning solution or manual tools first, then use the floor scrubber with a pad of corresponding hardness for cleaning. This avoids premature wear of the pad or poor cleaning results.

3. Maintain proper water volume: Adjust the water output of the floor scrubber according to the floor condition and the type of pad to keep the floor moist but not overly wet. Excessive water can accelerate pad wear, while too little water affects cleaning effectiveness. Follow the "wet scrub - dry suction" principle to ensure the floor dries quickly after cleaning.

4. Apply even pressure and move at a steady speed: When operating the floor scrubber, maintain an appropriate angle (usually around 15°) between the machine body and the floor, and apply even pressure. Push the machine forward at a steady pace, avoiding sudden acceleration, abrupt stops, or sharp turns to prevent excessive pad wear or uneven cleaning of the floor.

5. Regular inspection and replacement: Regularly check the wear condition of the pad. Replace it promptly when its color fades, the texture becomes blurry, or the cleaning effectiveness declines. An overly worn pad not only performs poorly in cleaning but may also scratch the floor. Follow the manufacturer's recommended replacement cycle and adjust according to actual usage.

6. Proper storage and maintenance: Thoroughly clean the pad after use to remove residual stains and cleaning agents, preventing hardening or mold growth. Dry it and store it in a well-ventilated, shaded area to avoid deformation from pressure. For detachable pads, regularly check if the fixing screws or clips are loose to ensure secure installation.

7. Use in combination: For large-scale cleaning tasks, prepare multiple pads of different hardnesses and materials. Use them in the order of "hard to soft, coarse to fine" to efficiently remove stains and meticulously polish the floor, maintaining the pad in its optimal condition.

By following these cleaning tips for floor scrubber pads, users can not only fully leverage the cleaning efficiency of the pads and enhance the quality of ground cleaning but also effectively extend the service life of the pads, reduce cleaning costs, and achieve efficient, economical, and environmentally friendly ground cleaning operations.